ak22:
are you on WhatsApp?

westliverenterp:
will 5 million be enough to build 2 units of two bedroom flats in Edo State..

Umarzy:


It should be. I'm an Architect and the design we do determines the cost. If he can monitor the procurement of materials and payment to labourers, then i don't see why N5m should not be enough. And when I said the design should be simple, i mean the rooms will not be luxury inclined. No differential fenestration on the buildings, use of flat roof/low-pitched roof, nothing like concrete fascia or parapet walls, elimination of all elements of architectural brutalism. I didn't add external works. All i said here is from foundation to finishing of the structure.

Timtol:

I can advertise you to use it if you don't see it as a waste of money, but the DPM will help you in a way that it will hold the water during casting and after casting.
It helps you to retain the water and through this solidifies not allowing the water to escape and you gonna have a smooth result after the DPM is been removed at a certain day after curing for 28days.
God's speed.

topsy23:



It is necessary boss if you have the money do it once n for all... God will provide for u.

You can also contact us for your complete MEP design drawings and also the installations.

our contact still remain the same 08033653191. 08051750560
whatsapp number 08033643191

You can check our signature for more info

AbbeyLinkoln92:


It may be able to finish it, depending on your taste


Should incase my service is needed. You can contact me.

boay:



What's the location in Edo?

There are so many things to consider. Your taste in the design and quality of materials, specification, aesthetics and your construction management skills will determine this.

Besides, you said TWO UNITS of TWO Bedroom flat will it or not as a QS

No be small thing my brother

elengine:
Hello the experience and professionals in the house.

Kindly advise me on the quotation for wiring attached here. The house is a portable 4 bedroom duplex with a Bq. It occupies about 200sqm. I feel the materials is too much and I sense the man may want to buy them in excess and take the rest home since am the one buying them. It is a full conduit. This phase is to draw buy wire and draw it

topsy23:



The quote can only be questioned IF the plan of the house is available...

2.5mm and 4mm quantities are okay based on the size of the building and am very sure each room will have AC including sitting room and each toilet will also have water heater...

The only quantity that looks suspicious is the 1.5mm red BUT if external light as included it's okay... Also I noticed that there is no green or yellow colour which is the earth cable in 2.5mm and 4mm cable .

Jdesigns:
Greetings to all our muslim brothers and sisters

Also, like how much would digging of foundation cost around Ikorodu axis

Thanks in advance

AbbeyLinkoln92:
If land is already obtained, 5m will finish the twin 2 bedroom flats. It only depends on the taste of the builder.



Meanwhile i advertise my business when i comment,
Don't get it twisted.

Babs612000:


My oga does the N5m includes the electrical,borehole,sockaway, WC, shower,sink and not to talk of painting,building plans approval.
I don't know how N5m will complete a modern two units of bedrooms flats.
The house will have the following, 4 rooms,two sitting rooms,two kitchens,two visitors toilets and minimum of two toilets and not four.

elengine:
Ok. I will get the plan available. As for the green wire, does it mean that he omitted it or there is other ways to handle that

westliverenterp:
will 5 million be enough to build 2 units of two bedroom flats in Edo State..

elengine:
Hello the experience and professionals in the house.

Kindly advise me on the quotation for wiring attached here. The house is a portable 4 bedroom duplex with a Bq. It occupies about 200sqm. I feel the materials is too much and I sense the man may want to buy them in excess and take the rest home since am the one buying them. It is a full conduit. This phase is to draw buy wire and draw it

twinskenny:


what make of cable is this?

jabolo:

Yes, those prices seem very cheap, right?
Me, I'm getting quoted N11k for 1.5mm.

twinskenny:


what make of cable is this?

topsy23:


11k for 1.5mm?? almost double of the price

jabolo:


Yes, those prices seem very cheap, right?

Me, I'm getting quoted N11k for 1.5mm.

jabolo:
Serious stuff, I know. I'm getting to the bottom of this but I'm told coil lenghts differ sometimes (75m vs 100m?)

Over to the gurus here.

twinskenny:



not really prices of coleman cable is a bit on the low for something now

11k for 1.5mm or 2.5mm?

jabolo:
Serious stuff, I know. I'm getting to the bottom of this but I'm told coil lenghts differ sometimes (75m vs 100m?)

Over to the gurus here.

allCopacetic:

In the absence of the above you can employ what is arguably the best Authentication method.....The ultimate litmus test for authenticity of a coil of wire Is the coil weight. This is because the weight of a given coil of cable is dependent on the three main properties that are typically alterable... The length of conductor, diameter of the conductor, and composition (which determines unit mass). So it easlily reveals the shortcomings in any of those areas

If the diameter is too small, there is a “very noticeable” reduction in weight
If the length is short there is also a substantial reduction in weight.
If the conductor is iron, ( heavier metal than Copper) the coil will be heavier than it should be, if its made of alloy it’ll be lighter.

So armed with a portable digital scale (the kind you can put in a bag)... and information on the approximate weight of a coil of each cable size; you can quickly and correctly ascertain authenticity.

I have come up with an idea...... As time permits , I will provide information on the approximate weight of a number of sizes.I will be arriving at the figures for each size by taking the weight of three randomly selected samples from a pool of about 100 coils , to arrive at an average figure or range, as well as see the degree of variation within the pool. I will be opening a thread documenting the weighting process and results. I will be doing this for COLEMAN cables only It would be nice to have someone else try the same for another brand and post results too.

beamNIGERIA:


Greetings
The answer to the question you asking is relative.
There is a standard price rate for excavation per cum. Calculate the cum of total foundation excavation from the drawing multiple by the rate. Its going to help you bargain with labour.

My observation..... please on that plan where is the kitchen? What's the rationale behind having the windows less that 1m? even in the sitting room? A whole lot of coordination and spatial issues on that drawing.

My advice, engage a professional, at least for the client's sake.

Thanks all the best