Due to the erratic nature of the power supply, many have considered buying a generator. Smaller generators have limitations, but a diesel generator will be a better choice.
But which diesel generator should you go for?
There are many of them outside there, such as Perkins, Deutz, Lister Petters, Cummins, Cat, etc.
You can watch this video to make a choice👉
https://www.youtube.com/watch?v=c-CSXyS2lqs

Does Exhaust Leaks Increases Fuel Consumption
This is one of the myths that was passed on to us that exhaust leaks increase fuel consumption.

Is that true?

The answer is yes and the answer is no.

Are you confused? Please don't!!

If the exhaust leak is before the exhaust catalytic then the answer is yes.

But if the exhaust leak is after the exhaust catalytic then the answer is no.

For more details on this👉@mrengine YouTube channel.

Have you been seeing a diesel mechanic claim he can repair all diesel engines? But is that really possible? What is your answer?
Watch this video 👉https://youtube.com/live/OlWw2Pzg4DA?feature=share

For the fact that your engine is running is not a sufficient reason that is hundred percent ok. There can be some hidden faults in you car, but in this video you will see those factors that help you to know the state of your engine.

https://www.youtube.com/watch?v=vxuOBdrcuA0

👉👉👉 If you enjoyed the video don't forget to subscribe to the channel, like and share.

There are many questions and debates on which one is the for homes.
However in this video below, 7 factors were used to analyze the debated question.
Watching the video will help you to make your decision easily.


https://www.youtube.com/watch?v=e5JjQ5DbCGA

In some some countries like Nigeria, the use of thermostat in cars or other engine is not too important because of our hot weather condition. So there is needs to be removed. Where can it be found? Enjoy the short video below.


https://www.youtube.com/watch?v=DP8woZlfILU

One of the most simple but technical to do in engine is valve setting. But it is actually simple only if you understand it.

Just click and watch this video to see how to perform this task.

������


https://www.youtube.com/watch?v=6aTS8LG-Opo

These are two German machines. The debate over the best among them is unending. Are they truly better than each other or they are equal.

Click the link below to enjoy the debate.
https://www.youtube.com/watch?v=pyWgafgw7tY

Scavenging system is the process of removing exhaust gas from the cylinder and replace it with fresh air .

Types scavenging system
1. Loop scavenging
2. Uniflow scavenging
3. Crossflow scavenging

For more details watch a video. Click the link below.
https://www.youtube.com/watch?v=WBQ-TPPzoEI

There are few systems that really make engine to work. They are Fuel system, intake system, exhaust system , valve train system.

Valve train system plays a significant role in general engine system.

For an engine to work effectively, the engine valve must properly adjusted.

Below video explained everything about valve system.

Subscribe to the Chanel for more videos
like this.


https://www.youtube.com/watch?v=ySN9JW4BZ84

Several Components made up an engine. Each of this components must properly perform their functions for the engine to work efficiently.
Are you familiar with engine Components? In the below video , watch how names and functions of engine Components.


https://www.youtube.com/watch?v=Teay5dN4CM4

There are certain things we must do before starting an engine.

It must be a daily routine for us. We should develop such a culture .

Kindly click the link below to watch a free video on what we must do before starting an engine be it cars, generators, forklift, crane and other mechanical equipments.


https://www.youtube.com/watch?v=2JPeqTdw-q8

The major difference between oil strainer and oil filter is the size of particles they remove from lubricant.

@mr engine

There are three major types of Diesel Fuel injection pump

1.Pump-line-nozzle
2. Unit injector
3. Common rail

@mr engine

INJECTION TIMING
It is also called spill timing, is the moment when diesel fuel enters the cylinder during the combustion phase.

@mr engine

In conventional engines, one piston for one cylinder.

But in opposed-piston engine, two piston for one cylinder.

To shock you the most, the engine has no top cylinder and no valve train system.

Click the link below to see how this type of engine work.������

https://www.youtube.com/watch?v=mB80ZADNEPM

Thrust washers is a popular component in mechanical section.

Some refer to it as thrust washer, while some call it thrust bearing.

The question is ' what is the right name for this component"

What is certain is that thrust washer is located in between a stationary component and rotating component.

����


https://www.youtube.com/watch?v=D1782IqY3Hw

Click to watch a free video on four new things you need to learn about thrust washer

Due to the working principles of internal combustion engine, it always generate heat.

This heat must properly maintain so that it will not resulted in overheating.

Overheating is one of the common problems internal combustion engine usually experienced.

To prevent this from happening, waterpump was designed to cooled the engine temperature.

Watch the video below to see how waterpump works.�����

https://www.youtube.com/watch?v=aG6t4N7XoKY

Engine mount is made of solid rubber to prevent metal-to-metal contact between the engine and the equipment.

Click the link below to watch a free video on how symptoms of engine mount and types of engine mount.

���������

https://www.youtube.com/watch?v=0DKi-3wKP4U

Human heart and engine oil pump are very similar based on the functions they are rendering to their individual Host.

Heart steadily pump blood, while oil pump steadily pump oil .

Please watch this free videos and see how science mimick nature.������


https://www.youtube.com/watch?v=HZq-VE9sc90

In internal combustion engine, heat frequently generated. In other to maintain the engine temperature, cooling system was introduced.

There are two types of cooling system
- Water cooling system
- Air cooling system

But what actually cool your piston? Good question. The component is called "Piston cooling Jet"

Click the link below to watch the free video on how piston cooler work.
�����

https://youtu.be/NT4jTWotbG

Beyond any doubt, man city is in top form. They rarely loss a game. The players were well immersed into Pep football philosophy.

It takes a perfect 90mins to defeat them. Presently, man city is at the top of the table with a healthy 10 points cushion.

Any slip from Chelsea tomorrow make it almost impossible for them to have any hope of winning the premier league.

So how can Chelsea survives Pep well - informed team.


Click the link below to enjoy the match analysis.....������


https://www.youtube.com/watch?v=vFTZGFnEjl0

Supercharger vs Turbocharger is one of the frequent argument in mechanical section.

Some argue that the are the same, why some say they are different.

Enjoy the argument in the below video. Please click the image below to watch .

��������Supercharger vs Turbocharger

One of the most debated issue in mechanical line.

Click the image below and enjoy the debate
������

https://www.facebook.com/100045978799047/posts/485307456345210/

What a wonderful football match !!!! Super eagle was awesome yesterday. Our minds keep remembering how mesmerising the super eagle was yesterday.

Please click the link below, let us enjoy free video on Nigeria vs Egypt
����������

https://youtube.com/channel/UCIB5iOa2BIFSVOTESazqE8g

1. Tuchel twisted his formation
2. Saul Niguel played his best game in Chelsea
shirt
3. Malang Sar silence Harry Kane
4. Lukaku has put the controversial interview
matter behind him.
5. Ziyech intensity shown
6. Conte visited Stamford bridge.

Click the link below the video
�����������

https://www.youtube.com/watch?v=sfonldvE6GQ

Diesel engine work in a sequence of
1. Intake
2. Compression
3. Power
4. Exhaust

For proper explanation on video click the link below for free


Watch how does diesel engine
works

Click the link below
�������

https://www.youtube.com/watch?v=AbMRChT8IrM

Recently loan apps burst into the scene. Although borrowing is never a good thing, but sometimes when the going get tough, someone can borrowed.
Whenever there is need for borrowing federal government also borrow from other nations. And at due time the money would be refunded.
The activities of loan apps is now going out of hand. They operate without any watch dog. They abused people and talk to their customer anyhow.
If their activities should persist, atleast a body should be set up to checkmate their activities. For example, a friend loan expired, just after 2days, they started posting him everywhere, send defamatory messages to his phone contacts.
I think this is an abused. Some allowance supposed to be given to the debtors to pay. After all, they still charged for late payment. If you are charging for late payment, considerable time to been given for the debtors to clear up.
Especially, when you have little misunderstanding with any of their staff, then that is your end, your name will be everywhere. The worst side of it all is that no superior office to report him.
Now 419 and dubious people are also taken advantage of their text.

I think something must be done..........



I rest my case for now.

The game was even between Chelsea and Aston Villa in the first halve. But the introduction of Lukaku change the music.
Lukaku caused Villa defence all sorts of problems most glaring one is his physicality. . They can't just cope, it was a hell for them .
Tuchel deserves some credit for bring him in. It was a spot on substitute. The only but was Kanye's injury. Hope kovacic can deptise him . Up Chelsea.....

One of our weakest sectors is mechanical sector. We keep bringing in expatriate to help us out. Every year we are producing mechanical engineers who are truly sound in theory but out of sort in practical.
Sincerely, it is never their fault. The root of the problem is faulty educational system. But something can be done.
Engine maintenance is a bigger part of mechanical sector. It is expected of a mechanical engineer to have a deep knowledge of engine.
Our so called mechanic technicians are solid in practical but wanting in theories and engine principles. The roadside mechanic cannot even properly explain what they are doing.
To fixed this problem, I come up with a package that bridge this gap. The course provided practical Solutions for mechanical engineers on heavy duty diesel engine. While the other way round, it provides simple and well-explained engine principles and applications for technicians. This course will turned the roadside mechanic into a semi- engine.
Who are the beneficiaries?
---- mechanical undergraduate
---- mechanical postgraduate
----- mechanical technical college
------ technicians
------ those who are ready to improve their technical know how in diesel engine.

The package is cheap and value loaded.
For more info chat me up on this no.

08064968585
sheychicagosolution@gmail.com
Thanks........

Open the attachment below